? 2006 glenair, inc. cage code 06324/0ca77 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com k-1 e-mail: sales@glenair.com a b c d e f g h j k l m series 80 mighty mouse asap cordsets for ethernet, ieee 1394 and usb 2.0 100base-t cordset with 4 pin series 800 connector asap cordsets for high speed serial data how to order cordsets step 1: select the connector series table1 lists the ? ve types of series 80 connectors. for more information on selecting a connector, please refer to the connector selection chart on the following page. this section does not contain ordering information for series 802 aqua mouse cordsets. please contact glenair for information on hazardous environment high pressure cables for the 802 series. step 2: select the cable table 2 contains speci? cations for standard data cables. the cable type also determines the connector layout. 4 pin connectors are used for 4 wire cables, and 10 pin connectors are used for 8 wire cables. step 3: select a cable jacket table 3 shows available jacket options. choose fep ? ourocarbon jackets for airframe and avionics applications, or choose low smoke/zero halogen polyurethane jackets for soldier systems, vehicles, and transit systems. step 4: select a cable-to-connector interface table 3 provides three ways to attach the cable to the connector: 1. polyamide boot, overmolded with ? exible strain relief 2. aluminum backshell, shielded, watertight and removable 3. heat-shrink boot, low smoke/ zero halogen step 5: select a connector con? guration table 1 shows connector codes for specifying plug versus receptacle and pin versus socket contacts. add a plating code, keying option and length. upgrade commercial high speed serial interconnects to mil-spec performance. glenairs asap mighty mouse cordsets are available for 100base-t, gigabit ethernet, iee 1394 and usb 2.0 applications. these cordsets combine aerospace- grade data cables with series 80 mighty mouse harsh environment connectors for maximum performance and minimum size. fep jackets meet faa flammability requirements. or, choose low smoke / zero halogen polyurethane jackets for mass transit or shipboard applications. three strain relief options C standard overmolded cables offer excellent strain-relief and cable sealing.or, choose heatshrink boots for smallest form factor. if repairability and ruggedness are important, choose machined aluminum emi backshells. rev. 05-apr-2007
? 2006 glenair, inc. cage code 06324/0ca77 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com k-2 e-mail: sales@glenair.com a b c d e f g h j k l m series 80 mighty mouse asap cordsets for ethernet, ieee 1394 and usb 2.0 connector selection guide series 800 series 801 series 803 series 804 series 805 description original mighty mouse with unf threads double-start acme ? turn bayonet push-pull triple-start acme notes a general purpose connector for ethernet switches, tactical equipment and instrumentation. more rugged keys and threads compared to series 800. faster mating, slightly larger than series 800. quick-mating, light duty, general purpose. not rated for immersion. 50 milliohms shell-to- shell resistance. breakaway connector for headsets and tactical equipment. gold-plated spring for long mating life and superior emi shielding. clicker ratchet mechanism and ground spring for military airframes and avionics boxes. fast-mating, d38999 equivalent. number of contacts 3 to 37 3 to 85 3 to 85 3 to 85 4 to 85 coupling threaded coupling with 4 ? turns to full mate threaded coupling with 1 ? turns to full mate push-to-mate, ? turn to lock quick-disconnect with canted spring one full turn for full mate water immersion mil-std-810 method 512 1 meter for 1 hour mil-std-810 method 512 1 meter for 1 hour splashproof mil-std-810 method 512 1 meter for 1 hour mil-std-810 method 512 1 meter for 1 hour emi shielding good good fair very good excellent vibration and shock 37 g's random vibration 300 g's shock 37 g's random vibration 300 g's shock 37 g's random vibration 300 g's shock 37 g's random vibration 300 g's shock 37 g's random vibration 300 g's shock mating cycles 2000 cycles 2000 cycles 250 cycles aluminum 2000 cycles sst 2000 cycles 2000 cycles electrical performance #12: 23 amp, 500 vac #16: 13 amp, 500 vac #23: 5 amp, 500 vac #12: 23 amp, 500 vac #16: 13 amp, 500 vac #23: 5 amp, 500 vac #12: 23 amp, 500 vac #16: 13 amp, 500 vac #23: 5 amp, 500 vac #12: 23 amp, 500 vac #16: 13 amp, 500 vac #23: 5 amp, 500 vac #12: 23 amp, 500 vac #16: 13 amp, 500 vac #23: 5 amp, 500 vac proven performance applications commercial air frame sensors; uav telemetry; tactical computers; ? eld radios; military air frame; dismounted soldier; tactical ground weaponry; avionic (flir) system soldier system radios; autosport diagnostics; airborne surveillance helmet breakaway connector; qdc battery; missile applications; weapon interconnect autosport; military air frame; joint strike fighter rev. 05-apr-2007
? 2006 glenair, inc. cage code 06324/0ca77 printed in u.s.a. glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 www.glenair.com k-3 e-mail: sales@glenair.com a b c d e f g h j k l m series 80 mighty mouse asap cordsets for ethernet, ieee 1394 and usb 2.0 table 1: how to order series 80 cordsets for high speed data sample part number 801-024 b f p a c m p z -72 connector series cable cable jacket strain relief connector end a p1 connector end b p2 shell material / finish protective cover shell pol. pos. oal length 800-035 series 800 cordset, unf threaded coupling, hex nut 801-024 series 801 cordset, double- start threaded coupling 803-007 series 803 cordset, push- pull with bayonet lock coupling 804-013 series 804 cordset, quick- disconnect push- pull 805-007 series 805 cordset, tri- start threaded coupling with ratchet and ground spring a 100base-t ethernet 4 cond. utp, oal shield 4 pin connector b 100base-t ethernet quad, oal shield, 4 pin connector c 1000base- t gigabit ethernet 8 cond. utp, oal shield, 10 pin connector d ieee 1394 hi-speed quad 110 ohm, 4 pin connector e usb 2.0, two #22 power, one stp #26 f two stp, 100 ohm, oal shield, 4 pin connector g four stp, 100 ohm, oal shield, 10 pin connector f fep flourocarbon jacket, translucent blue p low smoke/ zero halogen polyurethane jacket, black p polyamide overmold b metal backshell h heat-shrink boot, low smoke/ zero halogen a plug, with male pin contacts b plug, with female socket contacts c receptacle, with male pin contacts d receptacle, with female socket contacts a plug, with male pin contacts b plug, with female socket contacts c receptacle, with male pin contacts d receptacle, with female socket contacts n no connector (single- ended) m aluminum / electroless nickel nf aluminum / cadmium with olive drab chromate zn aluminum / zinc- nickel with olive drab chromate znu aluminum / zinc-nickel with black chromate z1 stainless steel / passivated p metal protective covers included n no covers supplied polarizing position depends on the connector series. for series 800 and 803: n normal x pos. x y pos. y z pos. z for series 801 and 805: a normal b pos. b c pos. c d pos. d for series 804: omit for single master key a normal b pos. b c pos. c d pos. d overall length in inches 12 inch min. rev. 05-apr-2007
|
